S. No.
|
Test Prescribed in IS: 2202 (Part-1, 1999)
|
Minimum Value for Conformity
|
Observed Value
|
1
|
Dimension and Squareness Test as
per IS: 4020 (Part 2), 1998
|
Height and width measured
within an accuracy of 1.0mm
|
Within specific
limits
|
2
|
General Fletness Test as per IS: 4020
(Part 3), 1998
|
Squareness measured to an
|
Within specific
limits
|
3
|
Local Plensss Test as per IS: 4020
(Part 4), 1998
|
Planeness measured to an
accuracy of 0.1 m
|
Within specified
limits
|
4
|
Impact Indentation Test as per IS: 4020
(Part 5), 1998
|
Indentation measured to an
accuracy of 0.1mm
|
Within specified
limits
|
5
|
Flexure Test as per IS: 4020
(Part 6), 1998
|
The deflection measured to an
accuracy of 0.1mm
|
Within specified
limits
|
6
|
Edge Loading Test as per IS: 4020
(Part 7), 1998
|
The deflection measured to an
accuracy of 0.1mm
|
Within specified
limits
|
7
|
Shock Resistance Test as per IS: 4020
(Part 8), 1998
|
4 to 5 shocks minimum
|
Within specified
limits
|
8
|
Bucking Test as per IS: 4020
(Part 9), 1998
|
Deformation measured to an accuracy of 1mm, 5 min.
after application of the load and 15 min. after unloading
|
Withing specified
limits
|
9
|
Slamming Test as per IS: 4020
(Part 10), 1998
|
50 times on the nail alt the rate of
4-5 drops/min.
|
Fround O.K.
|
10
|
Misuse Test as per IS: 4020
(Part 11), 1998
|
Should pass after applying 200 N force to the
handle at right angles to the plane of the frame
|
Satisfactory
|
11
|
Varying Humidity Test as per IS: 4020
(Part 12), 1998
|
Deviation measured to an
accuracy of 1.0mm
|
Within specified
limits
|
12
|
End immersion Test as per IS: 4020
(Part 13), 1998
|
No de-lamination
|
No de-lamination
found
|
13
|
Knife Test as per IS: 4020 (Part 14), 1998
|
Minimum Pass Standard
|
Excellent
|
14
|
Glue Adhesion Test as per IS: 4020
(Part 15), 1998
|
There shall be no de-lamination
|
No de-lamination
found
|
15
|
Screw Withdraw as per IS: 4020
(Part 16), 1998
|
Applied load shouldbe 2.0mm per min. for complete
withdrawal of the screw within specified limit
|
Within specified limit
|
